RPMBUILD
Section: Misc. Reference Manual Pages (8)
Updated: 09 June 2002
Index
Return to Main Contents
NAME
rpmbuild - Build RPM Package(s)
SYNOPSIS
BUILDING PACKAGES:
rpmbuild {-ba|-bb|-bp|-bc|-bi|-bl|-bs} [rpmbuild-options] SPECFILE ...
rpmbuild {-ta|-tb|-tp|-tc|-ti|-tl|-ts} [rpmbuild-options] TARBALL ...
rpmbuild {--rebuild|--recompile} SOURCEPKG ...
MISCELLANEOUS:
rpmbuild --showrc
rpmbuild-options
[--buildroot DIRECTORY] [--clean] [--nobuild]
[--rmsource] [--rmspec] [--short-circuit] [--sign]
[--target PLATFORM]
DESCRIPTION
rpmbuild is used to build both binary and source software packages.
A package consists of an archive of files and
meta-data used to install and erase the archive files. The meta-data
includes helper scripts, file attributes, and descriptive information
about the package.
Packages come in two varieties: binary packages,
used to encapsulate software to be installed, and source packages,
containing the source code and recipe necessary to produce binary
packages.
One of the following basic modes must be selected:
Build Package,
Build Package from Tarball,
Recompile Package,
Show Configuration.
GENERAL OPTIONS
These options can be used in all the different modes.
- -?, --help
-
Print a longer usage message then normal.
- --version
-
Print a single line containing the version number of rpm
being used.
- --quiet
-
Print as little as possible - normally only error messages will
be displayed.
- -v
-
Print verbose information - normally routine progress messages will be
displayed.
- -vv
-
Print lots of ugly debugging information.
- --rcfile FILELIST
-
Each of the files in the colon separated
FILELIST
is read sequentially by rpm for configuration
information.
Only the first file in the list must exist, and tildes will be
expanded to the value of $HOME.
The default FILELIST is
/usr/lib/rpm/rpmrc:/usr/lib/rpm/redhat/rpmrc:/etc/rpmrc:~/.rpmrc.
- --pipe CMD
-
Pipes the output of rpm to the command CMD.
- --dbpath DIRECTORY
-
Use the database in DIRECTORY rather
than the default path /var/lib/rpm
- --root DIRECTORY
-
Use the file system tree rooted at DIRECTORY for all operations.
Note that this means the database within
DIRECTORY
will be used for dependency checks and any scriptlet(s) (e.g.
%post if installing, or
%prep if building, a package)
will be run after a chroot(2) to
DIRECTORY.
BUILD OPTIONS
The general form of an rpm build command is
rpmbuild -bSTAGE|-tSTAGE [ rpmbuild-options
] FILE ...
The argument used is -b if a spec file is being
used to build the package and -t if rpmbuild
should look inside of a (possibly compressed) tar file for
the spec file to use. After the first argument, the next
character (STAGE) specifies the stages
of building and packaging to be done and is one of:
- -ba
-
Build binary and source packages (after doing the %prep, %build, and
%install stages).
- -bb
-
Build a binary package (after doing the %prep, %build, and %install
stages).
- -bp
-
Executes the "%prep" stage from the spec file. Normally this
involves unpacking the sources and applying any patches.
- -bc
-
Do the "%build" stage from the spec file (after doing the %prep stage).
This generally involves the equivalent of a "make".
- -bi
-
Do the "%install" stage from the spec file (after doing the %prep and
%build stages). This generally involves the equivalent of a
"make install".
- -bl
-
Do a "list check". The "%files" section from the spec file is
macro expanded, and checks are made to verify that each file
exists.
- -bs
-
Build just the source package.
The following options may also be used:
- --buildroot DIRECTORY
-
When building a package, override the BuildRoot tag with directory
DIRECTORY.
- --clean
-
Remove the build tree after the packages are made.
- --nobuild
-
Do not execute any build stages. Useful for testing out spec files.
- --nodeps
-
Do not verify build dependencies.
- --rmsource
-
Remove the sources after the build (may also be
used standalone, e.g. "rpmbuild --rmsource foo.spec").
- --rmspec
-
Remove the spec file after the build (may also be
used standalone, eg. "rpmbuild --rmspec foo.spec").
- --short-circuit
-
Skip straight to specified stage (i.e., skip all stages leading
up to the specified stage). Only valid with -bc
and -bi.
- --sign
-
Embed a GPG signature in the package. This signature can be used
to verify the integrity and the origin of the package. See the
section on GPG SIGNATURES in
rpm(8)
for configuration details.
- --target PLATFORM
-
When building the package, interpret PLATFORM
as arch-vendor-os and set the macros
%_target,
%_target_cpu, and
%_target_os
accordingly.
REBUILD AND RECOMPILE OPTIONS
There are two other ways to invoke building with rpm:
rpmbuild --rebuild|--recompile SOURCEPKG ...
When invoked this way, rpmbuild installs the named source
package, and does a prep, compile and install. In addition,
--rebuild builds a new binary package. When the build
has completed, the build directory is removed (as in
--clean) and the the sources and spec file for
the package are removed.
SHOWRC
The command
rpmbuild --showrc
shows the values rpmbuild will use for all of the
options are currently set in
rpmrc and
macros
configuration file(s).
FILES
rpmrc Configuration
/usr/lib/rpm/rpmrc
/usr/lib/rpm/redhat/rpmrc
/etc/rpmrc
~/.rpmrc
Macro Configuration
/usr/lib/rpm/macros
/usr/lib/rpm/redhat/macros
/etc/rpm/macros
~/.rpmmacros
Database
/var/lib/rpm/Basenames
/var/lib/rpm/Conflictname
/var/lib/rpm/Dirnames
/var/lib/rpm/Filemd5s
/var/lib/rpm/Group
/var/lib/rpm/Installtid
/var/lib/rpm/Name
/var/lib/rpm/Packages
/var/lib/rpm/Providename
/var/lib/rpm/Provideversion
/var/lib/rpm/Pubkeys
/var/lib/rpm/Removed
/var/lib/rpm/Requirename
/var/lib/rpm/Requireversion
/var/lib/rpm/Sha1header
/var/lib/rpm/Sigmd5
/var/lib/rpm/Triggername
Temporary
/var/tmp/rpm*
SEE ALSO
popt(3),
rpm2cpio(8),
gendiff(1),
rpm(8),
rpmbuild --help - as rpm supports customizing the options via popt
aliases it's impossible to guarantee that what's described in the manual
matches what's available.
http://www.rpm.org/ <URL:http://www.rpm.org/>
AUTHORS
Marc Ewing <marc@redhat.com>
Jeff Johnson <jbj@redhat.com>
Erik Troan <ewt@redhat.com>