BCCMD
Section: Linux System Administration (8)
Updated: Jun 20 2006
Index
Return to Main Contents
NAME
bccmd - Utility for the CSR BCCMD interface
SYNOPSIS
bccmd
bccmd [-t <transport>] [-d <device>] <command> [<args>]
bccmd [-h --help]
DESCRIPTION
bccmd
issues BlueCore commands to
Cambridge Silicon Radio
devices. If run without the <command> argument, a short help page will be displayed.
OPTIONS
- -t <transport>
-
Specify the communication transport. Valid options are:
-
- HCI
-
Local device with Host Controller Interface (default).
- USB
-
Direct USB connection.
- BCSP
-
Blue Core Serial Protocol.
- H4
-
H4 serial protocol.
- 3WIRE
-
3WIRE protocol (not implemented).
-d <dev>
Specify a particular device to operate on. If not specified, default is the first available HCI device
or /dev/ttyS0 for serial transports.
COMMANDS
- builddef
-
Get build definitions
- keylen <handle>
-
Get current crypt key length
- clock
-
Get local Bluetooth clock
- rand
-
Get random number
- chiprev
-
Get chip revision
- buildname
-
Get the full build name
- panicarg
-
Get panic code argument
- faultarg
-
Get fault code argument
- coldreset
-
Perform cold reset
- warmreset
-
Perform warm reset
- disabletx
-
Disable TX on the device
- enabletx
-
Enable TX on the device
- singlechan <channel>
-
Lock radio on specific channel
- hoppingon
-
Revert to channel hopping
- rttxdata1 <decimal freq MHz> <level>
-
TXData1 radio test
- radiotest <decimal freq MHz> <level> <id>
-
Run radio tests, tests 4, 6 and 7 are transmit tests
- memtypes
-
Get memory types
- psget [-r] [-s <stores>] <key>
-
Get value for PS key.
-r sends a warm reset afterwards
- psset [-r] [-s <stores>] <key> <value>
-
Set value for PS key.
-r sends a warm reset afterwards
- psclr [-r] [-s <stores>] <key>
-
Clear value for PS key.
-r sends a warm reset afterwards
- pslist [-r] [-s <stores>]
-
List all PS keys.
-r sends a warm reset afterwards
- psread [-r] [-s <stores>]
-
Read all PS keys.
-r sends a warm reset afterwards
- psload [-r] [-s <stores>] <file>
-
Load all PS keys from PSR file.
-r sends a warm reset afterwards
- pscheck [-r] [-s <stores>] <file>
-
Check syntax of PSR file.
-r sends a warm reset afterwards
KEYS
bdaddr country devclass keymin keymax features commands version
remver hciextn mapsco baudrate hostintf anafreq anaftrim usbvid
usbpid dfupid bootmode
AUTHORS
Written by Marcel Holtmann <marcel@holtmann.org>,
man page by Adam Laurie <adam@algroup.co.uk>