XkbChangeEnabledControls

NAME

SYNOPSIS

Bool XkbChangeEnabledControls (Display *dpy, unsigned int device_spec, unsigned int mask, unsigned int values);
     

ARGUMENTS

- dpy

connection to X server

- device_spec

 keyboard device to modify

- mask

1 bit -> controls to enable / disable

- values

1 bit => enable, 0 bit => disable

DESCRIPTION

The EnabledControls control is a bit mask where each bit that is turned on means the corresponding control is enabled, and when turned off, disabled. It corresponds to the enabled_ctrls field of an XkbControlsRec structure (see STRUCTURES). The bits describing which controls are turned on or off are defined in Table 1.

Table 1 shows the actual values for the individual mask bits used to select controls for modification and to enable and disable the control. Note that the same mask bit is used to specify general modifications to the parameters used to configure the control (which), and to enable and disable the control (enabled_ctrls). The anomalies in the table (no "ok" in column) are for controls that have no configurable attributes; and for controls that are not boolean controls and therefore cannot be enabled or disabled.

Table 1 Controls Mask Bits
Mask Bit	which or	enabled	Value
	changed_ctrls	_ctrls
XkbRepeatKeysMask	ok	ok	(1L<<0)
XkbSlowKeysMask	ok	ok	(1L<<1)
XkbBounceKeysMask	ok	ok	(1L<<2)
XkbStickyKeysMask	ok	ok	(1L<<3)
XkbMouseKeysMask	ok	ok	(1L<<4)
XkbMouseKeysAccelMask	ok	ok	(1L<<5)
XkbAccessXKeysMask	ok	ok	(1L<<6)
XkbAccessXTimeoutMask	ok	ok	(1L<<7)
XkbAccessXFeedbackMask	ok	ok	(1L<<8)
XkbAudibleBellMask		ok	(1L<<9)
XkbOverlay1Mask		ok	(1L<<10)
XkbOverlay2Mask		ok	(1L<<11)
XkbIgnoreGroupLockMask		ok	(1L<<12)
XkbGroupsWrapMask	ok		(1L<<27)
XkbInternalModsMask	ok		(1L<<28)
XkbIgnoreLockModsMask	ok		(1L<<29)
XkbPerKeyRepeatMask	ok		(1L<<30)
XkbControlsEnabledMask	ok		(1L<<31)
XkbAccessXOptionsMask	ok	ok	(XkbStickyKeysMask |
			XkbAccessXFeedbackMask)
XkbAllBooleanCtrlsMask		ok	(0x00001FFF)
XkbAllControlsMask	ok		(0xF8001FFF)

The mask parameter specifies the boolean controls to be enabled or disabled, and the values mask specifies the new state for those controls. Valid values for both of these masks are composed of a bitwise inclusive OR of bits taken from the set of mask bits in Table 1, using only those masks with "ok" in the enabled_ctrls column.

If the X server does not support a compatible version of Xkb or the Xkb extension has not been properly initialized, XkbChangeEnabledControls returns False; otherwise, it sends the request to the X server and returns True.

Note that the EnabledControls control only enables and disables controls; it does not configure them. Some controls, such as the AudibleBell control, have no configuration attributes and are therefore manipulated solely by enabling and disabling them. Others, however, have additional attributes to configure their behavior. For example, the RepeatControl control uses repeat_delay and repeat_interval fields to describe the timing behavior of keys that repeat. The RepeatControl behavior is turned on or off depending on the value of the XkbRepeatKeysMask bit, but you must use other means, as described in this chapter, to configure its behavior in detail.  

RETURN VALUES

True

The X server supports a compatible version of Xkb.

False

The X server does not support a compatible version of Xkb or the Xkb extension has not been properly initialized.

STRUCTURES

The XkbControlsRec structure is defined as follows:

    #define XkbMaxLegalKeyCode     255
    #define XkbPerKeyBitArraySize  ((XkbMaxLegalKeyCode+1)/8)
    
    
    typedef struct {
        unsigned char   mk_dflt_btn;      /* default button for keyboard driven mouse */
        unsigned char   num_groups;       /* number of keyboard groups */
        unsigned char   groups_wrap;      /* how to wrap out-of-bounds groups */
        XkbModsRec      internal;         /* defines server internal modifiers */
        XkbModsRec      ignore_lock;      /* modifiers to ignore when checking for grab */
        unsigned int    enabled_ctrls;    /* 1 bit => corresponding boolean control enabled */
        unsigned short  repeat_delay;     /* ms delay until first repeat */
        unsigned short  repeat_interval;  /* ms delay between repeats */
        unsigned short  slow_keys_delay;  /* ms minimum time key must be down to be ok */
        unsigned short  debounce_delay;   /* ms delay before key reactivated */
        unsigned short  mk_delay;         /* ms delay to second mouse motion event */
        unsigned short  mk_interval;      /* ms delay between repeat mouse events */
        unsigned short  mk_time_to_max;   /* # intervals until constant mouse move */
        unsigned short  mk_max_speed;     /* multiplier for maximum mouse speed */
        short           mk_curve;         /* determines mouse move curve type */
        unsigned short  ax_options;       /* 1 bit => Access X option enabled */
        unsigned short  ax_timeout;       /* seconds until Access X disabled */
        unsigned short  axt_opts_mask;    /* 1 bit => options to reset on Access X timeout */
        unsigned short  axt_opts_values;  /* 1 bit => turn option on, 0=> off */
        unsigned int    axt_ctrls_mask;   /* which bits in enabled_ctrls to modify */
        unsigned int    axt_ctrls_values; /* values for new bits in enabled_ctrls */
        unsigned char   per_key_repeat[XkbPerKeyBitArraySize];  /* per key auto repeat */
     } XkbControlsRec, *XkbControlsPtr;