git diff-index [-m] [--cached] [<common diff options>] <tree-ish> [<path>...]
Compares the content and mode of the blobs found via a tree object with the content of the current index and, optionally ignoring the stat state of the file on disk. When paths are specified, compares only those named paths. Otherwise all entries in the index are compared.
-p, -u
-U<n>, --unified=<n>
--raw
--patch-with-raw
--patience
--stat[=width[,name-width]]
--numstat
--shortstat
--dirstat[=limit]
--dirstat-by-file[=limit]
--summary
--patch-with-stat
-z
--name-only
--name-status
--color
--no-color
--color-words[=<regex>]
When a <regex> is specified, every non-overlapping match of the <regex> is considered a word. Anything between these matches is considered whitespace and ignored(!) for the purposes of finding differences. You may want to append |[^[:space:]] to your regular expression to make sure that it matches all non-whitespace characters. A match that contains a newline is silently truncated(!) at the newline.
The regex can also be set via a diff driver or configuration option, see gitattributes(1) or git-config(1). Giving it explicitly overrides any diff driver or configuration setting. Diff drivers override configuration settings.
--no-renames
--check
--full-index
--binary
--abbrev[=<n>]
-B
-M
-C
--diff-filter=[ACDMRTUXB*]
--find-copies-harder
-l<num>
-S<string>
--pickaxe-all
--pickaxe-regex
-O<orderfile>
-R
--relative[=<path>]
-a, --text
--ignore-space-at-eol
-b, --ignore-space-change
-w, --ignore-all-space
--inter-hunk-context=<lines>
--exit-code
--quiet
--ext-diff
--no-ext-diff
--ignore-submodules
--src-prefix=<prefix>
--dst-prefix=<prefix>
--no-prefix
For more detailed explanation on these common options, see also gitdiffcore(7).
<tree-ish>
--cached
-m
The raw output format from "git-diff-index", "git-diff-tree", "git-diff-files" and "git diff --raw" are very similar.
These commands all compare two sets of things; what is compared differs:
git-diff-index <tree-ish>
git-diff-index --cached <tree-ish>
git-diff-tree [-r] <tree-ish-1> <tree-ish-2> [<pattern>...]
git-diff-files [<pattern>...]
The "git-diff-tree" command begins its ouput by printing the hash of what is being compared. After that, all the commands print one output line per changed file.
An output line is formatted this way:
in-place edit :100644 100644 bcd1234... 0123456... M file0 copy-edit :100644 100644 abcd123... 1234567... C68 file1 file2 rename-edit :100644 100644 abcd123... 1234567... R86 file1 file3 create :000000 100644 0000000... 1234567... A file4 delete :100644 000000 1234567... 0000000... D file5 unmerged :000000 000000 0000000... 0000000... U file6
That is, from the left to the right:
Possible status letters are:
Status letters C and R are always followed by a score (denoting the percentage of similarity between the source and target of the move or copy), and are the only ones to be so.
<sha1> is shown as all 0cqs if a file is new on the filesystem and it is out of sync with the index.
Example:
:100644 100644 5be4a4...... 000000...... M file.c
When -z option is not used, TAB, LF, and backslash characters in pathnames are represented as \t, \n, and \\, respectively.
"git-diff-tree", "git-diff-files" and "git-diff --raw" can take -c or --cc option to generate diff output also for merge commits. The output differs from the format described above in the following way:
Example:
::100644 100644 100644 fabadb8... cc95eb0... 4866510... MM describe.c
Note that combined diff lists only files which were modified from all parents.
When "git-diff-index", "git-diff-tree", or "git-diff-files" are run with a -p option, "git diff" without the --raw option, or "git log" with the "-p" option, they do not produce the output described above; instead they produce a patch file. You can customize the creation of such patches via the GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS environment variables.
What the -p option produces is slightly different from the traditional diff format.
diff --git a/file1 b/file2
The a/ and b/ filenames are the same unless rename/copy is involved. Especially, even for a creation or a deletion, /dev/null is not used in place of a/ or b/ filenames.
When rename/copy is involved, file1 and file2 show the name of the source file of the rename/copy and the name of the file that rename/copy produces, respectively.
old mode <mode> new mode <mode> deleted file mode <mode> new file mode <mode> copy from <path> copy to <path> rename from <path> rename to <path> similarity index <number> dissimilarity index <number> index <hash>..<hash> <mode>
The similarity index is the percentage of unchanged lines, and the dissimilarity index is the percentage of changed lines. It is a rounded down integer, followed by a percent sign. The similarity index value of 100% is thus reserved for two equal files, while 100% dissimilarity means that no line from the old file made it into the new one.
"git-diff-tree", "git-diff-files" and "git-diff" can take -c or --cc option to produce combined diff. For showing a merge commit with "git log -p", this is the default format. A combined diff format looks like this:
diff --combined describe.c
index fabadb8,cc95eb0..4866510
--- a/describe.c
+++ b/describe.c
@@@ -98,20 -98,12 +98,20 @@@
return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1;
}
- static void describe(char *arg)
-static void describe(struct commit *cmit, int last_one)
++static void describe(char *arg, int last_one)
{
+ unsigned char sha1[20];
+ struct commit *cmit;
struct commit_list *list;
static int initialized = 0;
struct commit_name *n;
+ if (get_sha1(arg, sha1) < 0)
+ usage(describe_usage);
+ cmit = lookup_commit_reference(sha1);
+ if (!cmit)
+ usage(describe_usage);
+
if (!initialized) {
initialized = 1;
for_each_ref(get_name);
diff --combined file
or like this (when --cc option is used):
diff --cc file
index <hash>,<hash>..<hash> mode <mode>,<mode>..<mode> new file mode <mode> deleted file mode <mode>,<mode>
The mode <mode>,<mode>..<mode> line appears only if at least one of the <mode> is different from the rest. Extended headers with information about detected contents movement (renames and copying detection) are designed to work with diff of two <tree-ish> and are not used by combined diff format.
--- a/file +++ b/file
Similar to two-line header for traditional unified diff format, /dev/null is used to signal created or deleted files.
@@@ <from-file-range> <from-file-range> <to-file-range> @@@
There are (number of parents + 1) @ characters in the chunk header for combined diff format.
Unlike the traditional unified diff format, which shows two files A and B with a single column that has - (minus --- appears in A but removed in B), + (plus --- missing in A but added to B), or " " (space --- unchanged) prefix, this format compares two or more files file1, file2,... with one file X, and shows how X differs from each of fileN. One column for each of fileN is prepended to the output line to note how Xcqs line is different from it.
A - character in the column N means that the line appears in fileN but it does not appear in the result. A + character in the column N means that the line appears in the result, and fileN does not have that line (in other words, the line was added, from the point of view of that parent).
In the above example output, the function signature was changed from both files (hence two - removals from both file1 and file2, plus ++ to mean one line that was added does not appear in either file1 nor file2). Also eight other lines are the same from file1 but do not appear in file2 (hence prefixed with +).
When shown by git diff-tree -c, it compares the parents of a merge commit with the merge result (i.e. file1..fileN are the parents). When shown by git diff-files -c, it compares the two unresolved merge parents with the working tree file (i.e. file1 is stage 2 aka "our version", file2 is stage 3 aka "their version").
The --summary option describes newly added, deleted, renamed and copied files. The --stat option adds diffstat(1) graph to the output. These options can be combined with other options, such as -p, and are meant for human consumption.
When showing a change that involves a rename or a copy, --stat output formats the pathnames compactly by combining common prefix and suffix of the pathnames. For example, a change that moves arch/i386/Makefile to arch/x86/Makefile while modifying 4 lines will be shown like this:
arch/{i386 => x86}/Makefile | 4 +--
The --numstat option gives the diffstat(1) information but is designed for easier machine consumption. An entry in --numstat output looks like this:
1 2 README
3 1 arch/{i386 => x86}/Makefile
That is, from left to right:
When -z output option is in effect, the output is formatted this way:
1 2 README NUL 3 1 NUL arch/i386/Makefile NUL arch/x86/Makefile NUL
That is:
The extra NUL before the preimage path in renamed case is to allow scripts that read the output to tell if the current record being read is a single-path record or a rename/copy record without reading ahead. After reading added and deleted lines, reading up to NUL would yield the pathname, but if that is NUL, the record will show two paths.
You can choose whether you want to trust the index file entirely (using the --cached flag) or ask the diff logic to show any files that doncqt match the stat state as being "tentatively changed". Both of these operations are very useful indeed.
If --cached is specified, it allows you to ask:
show me the differences between HEAD and the current index contents (the ones I'd write using 'git-write-tree')
For example, letcqs say that you have worked on your working directory, updated some files in the index and are ready to commit. You want to see exactly what you are going to commit, without having to write a new tree object and compare it that way, and to do that, you just do
git diff-index --cached HEAD
Example: letcqs say I had renamed commit.c to git-commit.c, and I had done an update-index to make that effective in the index file. git diff-files wouldncqt show anything at all, since the index file matches my working directory. But doing a git-diff-index does:
torvalds@ppc970:~/git> git diff-index --cached HEAD -100644 blob 4161aecc6700a2eb579e842af0b7f22b98443f74 commit.c +100644 blob 4161aecc6700a2eb579e842af0b7f22b98443f74 git-commit.c
You can see easily that the above is a rename.
In fact, git diff-index --cached should always be entirely equivalent to actually doing a git-write-tree and comparing that. Except this one is much nicer for the case where you just want to check where you are.
So doing a git-diff-index --cached is basically very useful when you are asking yourself "what have I already marked for being committed, and whatcqs the difference to a previous tree".
The "non-cached" mode takes a different approach, and is potentially the more useful of the two in that what it does cancqt be emulated with a git-write-tree + git-diff-tree. Thus thatcqs the default mode. The non-cached version asks the question:
show me the differences between HEAD and the currently checked out tree - index contents _and_ files that aren't up-to-date
which is obviously a very useful question too, since that tells you what you could commit. Again, the output matches the git-diff-tree -r output to a tee, but with a twist.
The twist is that if some file doesncqt match the index, we doncqt have a backing store thing for it, and we use the magic "all-zero" sha1 to show that. So letcqs say that you have edited kernel/sched.c, but have not actually done a git-update-index on it yet - there is no "object" associated with the new state, and you get:
torvalds@ppc970:~/v2.6/linux> git diff-index HEAD *100644->100664 blob 7476bb......->000000...... kernel/sched.c
i.e., it shows that the tree has changed, and that kernel/sched.c has is not up-to-date and may contain new stuff. The all-zero sha1 means that to get the real diff, you need to look at the object in the working directory directly rather than do an object-to-object diff.
As with other commands of this type, git-diff-index does not actually look at the contents of the file at all. So maybe kernel/sched.c hasncqt actually changed, and itcqs just that you touched it. In either case, itcqs a note that you need to git-update-index it to make the index be in sync.
You can have a mixture of files show up as "has been updated" and "is still dirty in the working directory" together. You can always tell which file is in which state, since the "has been updated" ones show a valid sha1, and the "not in sync with the index" ones will always have the special all-zero sha1.
Written by Linus Torvalds <m[blue]torvalds@osdl.orgm[][1]>
Documentation by David Greaves, Junio C Hamano and the git-list <m[blue]git@vger.kernel.orgm[][2]>.
Part of the git(1) suite